I don’t know if this phenomenon has occurred in your home, that is, the ground has returned to moisture. Many people don’t know what the solution is, so let’s learn about this on today’s topic! Let’s take a look at the solution to ground moisture return!
1. What is ground moisture return
Ground moisture-proofing means taking preventive measures on the ground during decoration. As the name implies, it prevents underground moisture from rising to the ground, walls, and indoor spaces.
2. Solutions to ground moisture return
1. Inspection
First check whether there are cracks in the ground. Cracks are the main channels for groundwater to seep upward. There are visible cracks. It is caused by shrinkage and cracking of the material. Then check whether there is a hollow drum on the ground. You can use a wooden stick to gently knock vertically along the ground. If the sound of the knock is hollow, there is a hollow drum there.
2. Treatment of cracks and hollows
For cracks and hollow areas, the surface layer should be knocked off, the cushion layer should be chiseled, and a layer of cement slurry should be applied to the cushion layer, sir, and then repaired with the same material as the surface layer. .
3. Moisture-proof treatment
After partial treatment of cracks and hollows, the surface layer should be fully moisture-proof and sealed. Generally, the method of applying waterproof paint or waterproofing agent can be used. Before painting, first chisel the surface layer, clean it, and apply a secondary waterproof coating. Apply pressure during the first coat so that it penetrates deeply into the pores.
3. Targeted methods for ground moisture-proofing
Moisture-proofing needs to be constructed before waterproofing. Generally, the original cement floors and walls should be treated before decoration. Only in this way can the fundamental moisture-proofing effect be achieved and the waterproofing layer can be prevented from bubbling and falling off. People generally use special floor moisture-proof liquids.
1. Good moisture-proof effect
The 20-30mm moisture-proof layer formed by the reaction with cement is integrated with the original base surface, rather than attached to it. While blocking moisture,It can achieve the breathing effect of concrete. Therefore, its permanent service life is guaranteed.
2. Environmental protection
It is very environmentally friendly and is composed of non-toxic inorganic substances without any volatile matter.
3. Convenient construction
As long as you spray two coats on the original cement base surface, you can move around after 1 hour, and you can proceed with the next decoration process after 72 hours.
4. Very cost-effective
The cost per square meter is about 20 yuan.
When encountering the phenomenon of ground moisture return, we must first find out the cause of the problem and then deal with it according to the solutions. You will know from the above. The above is what the editor will share with you todayGround moisture return SolutionWhat articles have been shared? I hope it will be helpful to you! Get away!
