We all use a lot of auxiliary materials when decorating our houses. For example, the most common one is tile adhesive, which is used in laying ceramic tiles. So, what Zhongtaojun will share with you today is about tile adhesive. Let’s take a look at the difference between multifunctional interface glue.
1. Tile adhesive
1. Ceramic tile adhesive
It is composed of high-quality polymer emulsion materials and inorganic silicate. The tile adhesive can be combined with a variety of bonding materials to form a tile adhesion system, which greatly improves the adhesion between the tiles and the base layer. This tile adhesive performs well on standard concrete slabs and glazed tiles with greatly improved safety. It is specially used for post-processing of wet-pasted vitrified tiles, effectively improving the bonding strength between vitrified tiles and bonding materials, and solving common problems such as hollowing and falling off of wet-pasted vitrified tiles. It is suitable for post-processing of stone and other bricks with low water absorption, dense texture and smooth surface.
2. Scope of application
After the concrete frame horizontal plates are removed, they can be used for indoor and outdoor flat renovation; low water absorption vitrified bricks, antique bricks, cultured stones, polished bricks, artificial stones, natural marbles, ceramic tiles, etc. are installed on the wall; cement batch fans are used to prevent dust from falling ; Anti-cracking and yellowing exterior wall paint; old wall renovation and waterproofing.
2. Multifunctional interface agent
1. It has super strong adhesion, high adhesion, high strength, aging resistance, strong adhesion and water resistance. It is suitable for interface treatment of indoor and outdoor walls, ceilings, ceramic tile surfaces, wooden substrates or smooth surface substrates before painting. Reduce or eliminate hollowing and shedding of the leveling layer and improve bearing capacity.
2. How to use
When using these two components, just mix the liquid and powder, mix into a uniform paste, leave it for 5 minutes, and then use a suitable cutter to evenly spread the cross-sectional area of the mixture on the base layer .
The surface of the base must be smooth, solid, clean, and free of dust.
Loose parts should be removed and leveled.
Pits with a depth greater than 5mm should be filled with 425× cement mortar (or commercial mortar). The paint film thickness is controlled at 2-3mm, 1-3kg per square meter, and the tool is a roller or brush.
Transparent single-component type, mix evenly during use, and the base layer is constructed using the "cross construction method". The construction interval is 1-2 hours.
3. The difference between ceramic tile adhesive and multifunctional interface agent
1. The main function of ceramic tile adhesive is to bond ceramic tiles
2. The interface agent is used for base treatment
The functions of the two products are completely different. When pasting ceramic tiles, you can choose to use an interface agent for base treatment first, and then use tile adhesive to paste the stone, which can increase adhesion!
3. From a morphological point of view, tile backing adhesive is divided into single-component and two-component. The single-component tile backing adhesive is a dry powder material, the two-component tile adhesive is a dry powder emulsion, and the edge agent is in the form of emulsion.
The above content is the article about The difference between ceramic tile adhesive and multifunctional interface agent. From the above, you can see that the functions of the two are completely different, so, It’s easy to understand, it’s not like saying I want tomato scrambled eggs or tomato scrambled eggs when ordering in the canteen, O(∩_∩)O haha~, funny, that’s all for today’s content.
